|
Physical
Length: 246 mm (9.7 in.)
Length with hanging bracket: 307 mm (12.1 in.)
Width: 234 mm (9.3 in.)
Width with hanging bracket: 234 mm (9.3 in.)
Height: 246 mm (9.7 in.)
Height with hanging bracket: 286 mm (11.3 in.)
Weight: 4.5 kg (9.8 lbs.)
Dynamic Effects
Multibeam effects
Color mixing: RGBWA
Color selection: 36 color presets
Electronic dimming: 0-100%
Strobe rate: 0-22 Hz
Strobe and pulse effects: Variable speed and action, random strobe
Electronic 'shutter' effect: Instant open and blackout
Strobe effects
Color: White
Strobe rate: Fixed, 15 Hz
Special effects: On/off, strobe effect, pulse effects, random and blackout
Laser effects
Color: Red, green
Special effects: On/off, strobe effect, pulse effects, random and blackout
Control and Programming
Control options: DMX, stand-alone
Safety lockout switch, laser: Keyed switch on/off operation
DMX channels: 2/16
Stand-alone trigger options: Sound-trigger, auto-run
User interface: Control panel with LED display
DMX compliance: ANSI E1.11 - USITT DMX512-A
Optics
Multibeam and strobe
Multibeam light source: 5 x 3 W RGBWA LEDs
Strobe light source: 8 x 1 W White LEDs
Minimum LED lifetime: 30 000 hours (to >70% luminous output)*
*Figure obtained under manufacturer's test conditions
Laser
Green laser, power / wavelength: 3.8 mW / 531 nm
Red laser, power / wavelength: 1.5 mW / 659 nm
Aperture diameter: 7 mm
Beam shape: Divergent
Pulse duration (frequency): Not pulsed
Class: 3R (US: Class IIIR)
Minimum laser lifetime: 3 000 hours*
*Figure obtained under manufacturer's test conditions
|
Electrical
AC power: 100-240 V nominal, 50/60 Hz
Fuse: F 3 AL, 250 V
Typical power consumption:: 35 W*
Maximum number of fixtures on AC power throughput, 100-130 V: 6 x THRILL Multi-FX LED or 3 A
Maximum number of fixtures on AC power throughput, 220-240 V: 10 x THRILL Multi-FX LED or 3 A
*Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Typical Power and Current
110 V, 60 Hz: 0.5 A, 35 W *
230 V, 50 Hz: 0.3 A, 35 W *
*Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Thermal
Cooling: Passive
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 0° C (32° F)
Total heat dissipation (calculated, +/- 10%) at full intensity, full white: 225 BTU/hr.
Approvals
EU safety: EN 60598-1, EN 60598-2-17, EN 60825-1, EN 62031, EN 6247-1, EN 6247-2-13, EN 62493, IEC TR 62471-2
EU EMC: EN 55015, EN 61000-3-2, EN 61000-3-3, EN 61547
Australia/NZ (pending): RCM
Included Items
Power cable, EU, IEC C13 female, molded Schuko, 1.5 m (4.9 ft.)
Power cable, US, IEC C13 female, molded NEMA 5-15P, 1.5 m (4.9 ft.)
Mounting bracket and hardware
Set of keys for laser safety switch
Accessories
Super lightweight half-coupler, black: P/N 91602018
Safety cable, SWL 60 kg (132 lb.), BGV C1/ DGUV 17, black: P/N 91604006
Ordering Information
THRILL Multi-FX LED: P/N 90280117
Construction
Housing: Steel
Color: Black
Ingress protection: IP 20
Installation
Mounting: Adjustable bracket, surface or truss mount
Mounting points: Bracket for single rigging clamp, M12 or ½”
Orientation: Any (respecting laser precautions)
Location: Indoor, dry locations only, overhead use only
Minimum distance above floor level: 3 m (9.8 ft.)
Minimum distance from public: 3 m (9.8 ft.)
Connections
AC power in/thru: IEC male inlet/female connector, C14/C13
DMX data in/thru: 3-pin XLR
|