Audio-Technica U851R Kondenser Boundary Mikrofon
Audio-Technica U851R Kondenser Boundary Mikrofon
Audio-Technica U851R Kondenser Boundary Mikrofon

Audio-Technica U851R Kondenser Boundary Mikrofon

Fiyat : $0.00(KDV Dahil)

Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations

 

Audio-Technica U851R Kondenser Boundary Mikrofon

 

Featuring breakthrough audio and mechanical design innovations, the phantom-powered U851R offers outstanding speech intelligibility and transparent sound quality for surface-mount applications. The microphone is equipped with a PivotPoint® rotating output connector, UniSteep® filter and UniGuard® RFI-shielding technology. It accepts interchangeable condenser elements available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. With a heavy die-cast case and silicon foam bottom pads to minimize coupling of surface vibration to the microphone, the U851R is equipped with self-contained electronics, eliminating the need for an external power module.

Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone
Superior off-axis rejection for maximum gain before feedback
UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
Self-contained electronics eliminate need for external power module
Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance
Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of surface vibration to the microphone
Low-profile design with low-reflectance black finish for minimum visibility

 

 

 

Element: Polarized condenser
Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
Frequency Response: 30 - 20,000 Hz
Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
Impedance: 200 ohms
Maximum Input Sound Level: 134 dB, 1 kHz at 1% T.H.D.
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Switches: Flat, roll-off
Dynamic Range: 108 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 68 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 4 mA typical
Weight: 9.2 oz (262 g)
Dimensions: 4.25" (108.0 mm) long, 3.31" (84.0 mm) maximum width, 0.91" (23.0 mm) height
Output Connector: TB3M-type
Cable: 25.0' (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM-type connectors
Accessories Included: Soft protective pouch

Ideal for sound reinforcement, professional recording and conferencing
PivotPoint® rotating output connector
Superior off-axis rejection for maximum gain before feedback
Outstanding rejection of radio frequency interference (RFI)
Small-diameter UniPoint capsule near boundary
Available in two colors: black (U851R) and white (U851RW)

 


Kullanım Kılavuzu

 

 

 

 

 

 

 

Kablolu Mikrofon
Boundary
cultureSettings.RegionId: 0 cultureSettings.LanguageCode: TR