Audio-Technica AT8656LED Gooseneck ve Boundary Mikrofonlar için Ledli Bağlantı Yuvası
Audio-Technica AT8656LED Gooseneck ve Boundary Mikrofonlar için Ledli Bağlantı Yuvası
Audio-Technica AT8656LED Gooseneck ve Boundary Mikrofonlar için Ledli Bağlantı Yuvası
Audio-Technica AT8656LED Gooseneck ve Boundary Mikrofonlar için Ledli Bağlantı Yuvası
Audio-Technica AT8656LED Gooseneck ve Boundary Mikrofonlar için Ledli Bağlantı Yuvası

Audio-Technica AT8656LED Gooseneck ve Boundary Mikrofonlar için Ledli Bağlantı Yuvası

Fiyat : $0.00(KDV Dahil)

Flush-mount microphone adapter with LED ring and touch switch for LOCAL control

 

Audio-Technica AT8656LED Gooseneck ve Boundary Mikrofonlar için Ledli Bağlantı Yuvası

 

Designed to be recessed into a table, the AT8656/LED Microphone Adapter facilitates the use of any gooseneck microphone or button type surface microphone with a 3-pin XLRM output, such as the ES945 and ES947 microphones in various presentation environments. It has a red / green LED lamp indicating the status of the microphone, and a touch button (switch) to manually switch the microphone from mute to unmute.

The adapter also has a locking switch which automatically locks the microphone in place from insertion to the manual release by the user.

Intended for use with a gooseneck or button-style boundary microphone
Works with 3-pin XLRM microphones
Switch Mute/Unmute
Integral, phantom-powered, Red/Green LED indicator
Lock tap automatically locks microphone in place, holding it securely
3-pin XLR output connection

 

 

 

Frequency Response: 50 - 20,000 Hz
Impedance: 360 Ohms
Switches: Touch-sensitive control: momentary
Phantom Power Requirements: 20-52V DC, 4.5 mA typical
Weight: 188 g
Dimensions: 139.3 mm long, 65.0 mm maximum width
Output Connector: 3-pin XLRM-type
Accessories Included: One pair surface isolators; gooseneck retaining ring & isolator; mounting nut; screws (3)

Adapter allows the installation into a ceiling, wall or table of any gooseneck microphone or button-type surface mic equipped with a 3-pin XLRM output
Quick assembly for install microphones, allowing integration with discretion
The possibility of contact closure allows the controlling of external devices through a built-in switch
The touch button allows the user to switch the Microphone from Mute (open) to Unmute (closed) and back.
Operates on 24-48V phantom power
The 360° ring-shaped red / green LED lamp indicates the status of the microphone
The latch automatically locks the microphone in place, holding it firmly until manually unlocked by the user
The adapter output is a 3-pin XLRM
Supplied with insulation washers for damping the vibration surface

 

 

Kablolu Mikrofon
Konferans
cultureSettings.RegionId: 0 cultureSettings.LanguageCode: TR